power inductors - shielded ctparts.com manufacturer of passive and discrete semiconductor components 800-684-5322 inside us 949-453-1811 outside us copyright ? 2007 by ct magnetics, dba central technologies. all rights reserved. ct magnetics reserves the right to make improvements or change specifications without notice central technologies 04.03.07 specifications parts are available in 20% only. * this indicates the current when the inductance decreases to 75% over it?s nominal value or dc current when the temperature rising t=40c lower, whichever is lower. CTEP125Sf please specify ?f? for rohs compliant l test dcr part inductance freq. max. *current number (h 20%) (khz) (m ) (a) CTEP125S_-1r2m 1.2 100 2.5 17.0 CTEP125S_-1r5m 1.5 100 2.5 14.0 CTEP125S_-2r5m 2.5 100 3.4 10.0 CTEP125S_-4r0m 4.0 100 5.4 8.3 CTEP125S_-6r0m 6.0 100 8.0 6.7 CTEP125S_-8r2m 8.2 100 11.4 5.8 CTEP125S_-100m 10 100 13.5 5.0 CTEP125S series from 1.2 h to 10 h not shown at actual size. characteristics description: smd shielded power inductor applications: power supplies for vtr, oa equipment, lcd televisions, pc notebooks, portable communication equipment, dc/dc converters, etc. operating temperature: -30c to +100c storage temperature: -30c to +100c inductance tolerance: 20% testing: tested on a hp4285a at 100 khz , 0.25vrms , 0adc packaging: tape & reel marking: parts are marked with inductance code miscellaneous: rohs compliant available. additional information: additional electrical & physical information available upon request samples available. see website for ordering information. pad layout size a b c d e f g h max. max. max. mm 12.9 12.9 5.8 2.6.2 7.0.2 4.0.2 4.2.2 2.5.2 inches .51 .51 .23 .10.01 .28.01 .16.01 0.170.1 .10.01 physical dimensions
|
